Jump to content

Final D16z6 Turbo Build.


Repsol

Recommended Posts

Engine:

- ACL Race Bearings STD.

- AEM High Volume Fuel Filter.

- AEM High Volume Fuel Rail.

- ARP Headstuds.

- Blox 76mm Throttle Body.

- Competition 59500 Stage 3 Camshaft.

- Custom 4 Bolt Downpipe.

- FJR Spec Custom Length I-Beam Connecting Rods.

- Full Engine Gasket Kit.

- Garrett 60-1 T3/Turbocharger.

- Gates Racing Timing Belt.

- GMB Water Pump.

- KMS Single Race Valve Springs.

- KMS Titanium Retainers.

- KMS Black Nitride Stainless Steel Valves.

- Moroso Oil Pan.

- NPR Piston Rings.

- OEM Honda Headgasket.

- Precision 1000cc Injectors.

- Skunk2 Pro Series Cam Gear.

- SPA Cast Top Mount Turbo Manifold.

- Spoolin-Performance Aluminum Charge Pipe Kit.

- Tial 38mm Wastegate. (PURPLE)

- Tial Q Blow Off Valve.

- YCP Vitara 75mm Pistons.

 

Exterior:

- OEM JDM Sidemarkers.

- One Piece Black Housing Headlights.

 

Interior:

- OEM GSR Leather Seats. (BLACK)

- OEM Interior Door Handles. (BLACK)

- OEM JDM Sun Visor Set.

- OEM Map Lights. (BLACK)

- Rewrap Grey Panels in ?.

- Tan Carpet Kit.

 

Electrical:

- GlowShift Boost Gauge.

- GlowShift Oil Pressure Gauge.

- GlowShift Wideband A/F Gauge.

- Hondata S300 Engine Management.

- Omni Power 3-Bar Map Sensor.

 

Suspension/Chassis/Braking:

- ASR Rear Subframe Brace. (PURPLE)

- Beaks Rear Subframe Tie Bar. (PURPLE)

- Blox Rear Lower Control Arms. (PURPLE)

- Goodridge G-Stop Brakeline Kit.

- Hawk HPS Street Brake Pads Front and Rear.

- PWJDM 3-Point Front Strut Tower Brace.

- PWJDM 4-Point Rear Strut Tower Brace.

- R1 Concepts Cross Drilled and Slotted Brake Rotors Front and Rear.

- Skunk2 Coilovers.

- Skunk2 Front Pro Series Camber Kit.

- Skunk2 Rear Pro Series Camber Kit.

- Skunk2 Sport Shocks.

Edited by Repsol
Link to comment
Share on other sites

Alrighty, Got pics of my new door handles and a pic of the new one piece. :)

 

Handles.

GEDC0131.jpg

 

Light.

GEDC0130.jpg

 

Now that I have a steady job for the time being, and I want my car done before Import Weekend, I'm trying to get as many parts as I can and get this car ready. I got another front bumper too but you don't need a pic of that. :D

Edited by Repsol
Link to comment
Share on other sites

Tan Suede all round, definitely, That would look sick. At first I was thinking tan maybe wouldn't look so good, but I it would fit in with the black/orange theme of the outside. You gonna re-wrap everything yourself?

and yeah, this forum is dead, most of the time. It seems to have gone downhill a bit recently...

Link to comment
Share on other sites

id say go with the tan, grey looks like ass IMO, and blackouts are a dime a dozen.

 

Also id stay away from suede/nubuck/alcantra as they are too easily stained, and a real PITA to get clean again. So thats why I voted for synth tan leather for shift/ebrake, and interior rewrap. That and honestly i think the tan would look very nice. What are you going to do about the seats? If you need a suggestion I am quite pleased with my iggees, and im pretty sure they could do black with tan insert, or if i were you, id do tan with a black insert.

 

also there was a guy on solsociety who made inserts for the change trays (between the bins) you might want to see if you can figure out who it was and have him make you one with your car's name stitched in black on a tan backing. wow.... you know... if you dont do tan and black.... i think i will on my next sol.

Edited by cmgogo
Link to comment
Share on other sites

Even though this forum has died down and there's no point for pictures, but here you guys are. We pulled the motor apart last night in the kitchen. :D My manifold and vin is here. I do have tags i still need to snag a pic of. but here ya go.

 

The Tear Down Process:

GEDC0135.jpg

 

GEDC0136.jpg

 

GEDC0137.jpg

 

GEDC0138.jpg

 

GEDC0139.jpg

 

GEDC0140.jpg

 

GEDC0141.jpg

 

GEDC0142.jpg

 

GEDC0143.jpg

 

SPA Top Mount:

GEDC0144.jpg

 

GEDC0145.jpg

 

GEDC0146.jpg

 

JDM Vin Tag YO:

GEDC0147.jpg

Link to comment
Share on other sites

The Legit JAP Plates:

GEDC0150.jpg

 

My Current Collection of new parts for the sol excluding front bumper, motor, turbo mani, lights, and door handles. Lol.

GEDC0153.jpg

 

The "501" could be SOL, "27" my birthday 2/7, and the "93" is the year of the car. Funny how it worked out like that. Didn't pay any mind to it while i bought them.

Link to comment
Share on other sites

im going to try to go to vegas invasion and the eibach meet in corona.. i wish you could go dylan.. then i could see where i stand with a boosted D in a sol and actually get to see your car in person lol

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...

Important Information

Terms of Use | Privacy Policy | Guidelines
We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.