Fergy82882 Posted January 12, 2004 Share Posted January 12, 2004 I have a 90 CRX HF and I was wondering if it would be easy to put the engine from a CRX SI into my car. I think the engine is a D16. The reason I want to do this my engine is on it's last leg and I don't have a lot of cash so I though I could do this for a little more horse power. If anyone knows how you can do this please explain Link to comment Share on other sites More sharing options...
VR17 Posted January 13, 2004 Share Posted January 13, 2004 switching from 8 valves to 16, thats a common swap for HF and a good 45HP gain.. Link to comment Share on other sites More sharing options...
EGRacer Posted January 18, 2004 Share Posted January 18, 2004 why waste your time in putting in the Si engine. why not put in a teg ls, zc, b16, or something a lil bit better? Link to comment Share on other sites More sharing options...
parsloe3x Posted January 18, 2004 Share Posted January 18, 2004 PUT IN AN LS MOTOR...HF's have the programed fuel injection which will make wiring it easy..at least compared to my 90 CRXDX and Hf 's are the lightest of the 3 styles....LS LS LS LS LS......Can you say tourqe ? Link to comment Share on other sites More sharing options...
VR17 Posted January 18, 2004 Share Posted January 18, 2004 I don't have a lot of cash so I though I could do this for a little more horse power. this is why Link to comment Share on other sites More sharing options...
sirex89 Posted January 25, 2004 Share Posted January 25, 2004 My best suggestion is to do what I did. I took out a loan and put a JDM B16A into my CRX. It was well worth it. Got a great deal from swapjdm.com. However, I have got my old Si engine but its got around 160000miles on it. So, I don't know what you call your engines last leg. If I can be any help pm me or email me at sirex_89@yahoo.com. -Dudley Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.