05accordguy Posted August 9, 2009 Share Posted August 9, 2009 I have a 2005 Accord EX 4cyl. Like lots of folks, I've got screwed up front rotors. I saw they were warped and such at 40K miles or so, but figured I would throw a new set of pads on them and see how much life I could get out of them. Well, I'm at 88K miles now, and need to replace them. I've done plenty of rotor/pads/calipers/cylinder replacements on numerous cars, but someone was telling me that the rotors on this car are actually pressed-on and may need a slide hammer to remove and press to re-install. I didn't have much luck googling this year of accord to see. Anyone have any experience with this Gen of Accord, and whether or not it has pressed-on rotors?? Thanks- Paul Link to comment Share on other sites More sharing options...
airjordan223 Posted August 9, 2009 Share Posted August 9, 2009 here you go man. http://www.ntpog.org/mods/fourth-brakes/index.shtml Link to comment Share on other sites More sharing options...
05accordguy Posted August 9, 2009 Author Share Posted August 9, 2009 here you go man. http://www.ntpog.org/mods/fourth-brakes/index.shtml I see this article references the 4th Gen accords, how about the 7th Gen accords? Link to comment Share on other sites More sharing options...
Turtlehead Posted August 11, 2009 Share Posted August 11, 2009 They are not pressed on with your generation. Only the 90 thru 97 Accords have the pressed on setup. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.