Solwings Posted June 12, 2007 Share Posted June 12, 2007 I blew my block last month and i have ordered another stock b16a block. I have all stock internals, but i wanted to find maybe another aftermarket forged rods with stock specs, to go with my stock pistons. I have been googling and searching but am not sure if they make stock spec sized rods that go with oem pistons. I planned on new rods, and after market valve train for my head. I was gonna go with a valvetrain package from ebay, so can anybody point me in the right directions with links to sites with the rods, cause i can't find any, that match up with oem pistons in a b16a thanks Link to comment Share on other sites More sharing options...
cranny Posted June 12, 2007 Share Posted June 12, 2007 the stock rods are good to rev as high as your gonna make power. Link to comment Share on other sites More sharing options...
Solwings Posted June 12, 2007 Author Share Posted June 12, 2007 ok, that sounds good. Ill just stick with my stock block setup. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.