89crxsi1003 Posted March 20, 2007 Share Posted March 20, 2007 i have an 89 si and i got a full skunk2 coilover kit on and i dropped it 2" in the front and 1 3/4 in the rear and my camber is negative by about 3 degress woundering what kind of kits people are using these days because skunk2 will make a coilover kit knowing it will mess with your camber but not a camber correction kit for the crxs whats a good brand at a fair price? also i wanted to do a compression test on my b16 ive never done one before how do u do it and what tools do u need? thanks:Tim Link to comment Share on other sites More sharing options...
compuvision02 Posted March 20, 2007 Share Posted March 20, 2007 I'm not going to sweat on this, but I doubt you NEED a camber kit for that size drop. I'm fairly low and I don't use one. Link to comment Share on other sites More sharing options...
airjordan223 Posted March 20, 2007 Share Posted March 20, 2007 i have a 2 inch drop and just got an omni power kit because my tires were showing wear. i bought an omni rear, but there is a trick where you can use washers for the rear and save some money. not sure exactly what it is, but someone on here does Link to comment Share on other sites More sharing options...
cranny Posted March 20, 2007 Share Posted March 20, 2007 i have precision engineering in the back , none up front , but my car is macpherson up front , not the same. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.