cclpickle Posted March 25, 2005 Share Posted March 25, 2005 ive recently installed a ZC engineDOHC with turbo . I want to know how much boost ? the stock ZC engine has 9:1 compresion . and for the last two days ive had my boost at 5 psi is this good or bad . its a t3 garret turbo. Link to comment Share on other sites More sharing options...
BigBirdSucks Posted March 25, 2005 Share Posted March 25, 2005 you could probably bump the boost up a bit. what EMS are you using? what injectors and such? Link to comment Share on other sites More sharing options...
boostn4ever Posted March 25, 2005 Share Posted March 25, 2005 It has alot to do with tuning. If you have go air/fuel mixture and correct timing you can boost as much as 14psi. Keep down around 8-10psi if you don't what to put a lot into tuning. Link to comment Share on other sites More sharing options...
Kastigir Posted March 25, 2005 Share Posted March 25, 2005 I would say 8 psi with minimal tuning would be perfect. Link to comment Share on other sites More sharing options...
cclpickle Posted March 26, 2005 Author Share Posted March 26, 2005 i have 2.2 injecters and feul pressure reg with 2.2 fuel pump Link to comment Share on other sites More sharing options...
BigBirdSucks Posted March 26, 2005 Share Posted March 26, 2005 I'm talking about engine management. injectors and FPR are not an EMS. Hondata, Uberdata, Autronic, and such are. Link to comment Share on other sites More sharing options...
cclpickle Posted March 26, 2005 Author Share Posted March 26, 2005 i cant afford a feul managment system right now but when i do which to choose i was thinking the AEM system. Link to comment Share on other sites More sharing options...
BigBirdSucks Posted March 27, 2005 Share Posted March 27, 2005 AEM EMS is junk. what OBD is your car? Link to comment Share on other sites More sharing options...
boostn4ever Posted March 27, 2005 Share Posted March 27, 2005 Haltech is a good unit. Link to comment Share on other sites More sharing options...
cclpickle Posted March 30, 2005 Author Share Posted March 30, 2005 i just have the stock 88 crx si ecu ,im stupid but what is obd 1- 2 or 3 >_< Link to comment Share on other sites More sharing options...
2point2 Posted March 30, 2005 Share Posted March 30, 2005 http://www.hondata.com Link to comment Share on other sites More sharing options...
..SSR.. Posted March 30, 2005 Share Posted March 30, 2005 If you're running w/o an EMS or FMU, your engine is already toast. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.