jshirey4 Posted October 31, 2020 Share Posted October 31, 2020 I'm having a problem with my 1996 Honda Accord where the lip of the EGR valve itself hangs over the mounting bolts so i cannot fit an extension as it hits the lip and doesn't fit flush with the hex. I've tried a wobble extension but it doesn't go at a hard enough angle. And a universal joint makes the socket too tall to fit in between the lip of the valve and the bolt. I'm on the verge of taking it to a mechanics shop but would like to avoid the unnecessary spending. Any help is appreciated greatly! Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.