Throttle Body

[dohc1991integra]

So my recent post about my idle problem was solved with the fact i need to get a gsr tb. After talking to a buddy i now have a gsr throttle body and cable. Nooooow onto new problems. (lets see if i can explain this) ...the current trottle cable pulls towards the driver wheel, and the gsr pulls from the bottom - up, towards the passenger wheel. Yes i know thats why the gsr throttle cable is longer so it can rap around and compensate for that, however the backet that holds the throttle cable adjustment right before the pulley wheel is missing... are the pulley wheels possible to switch? i have another tb (despite it being alot smaller) it pulls the direction i need it to.

 

Also could i use a regular LS tb? i didnt think i could because theyre smaller than the gsr.

 

heres a link below that better describes my problem... with pictures. Scroll down to the subheading "Throttle Cable"

 

http://www.google.com/imgres?imgurl=http://www.performanceforum.com/wesvann/honda/skunk2/m0537.JPG&imgrefurl=http://www.performanceforum.com/wesvann/honda/skunk2/skunk2.html&usg=__QIAjIbQQJrLHGXWngTmCmpQyTmI=&h=748&w=950&sz=77&hl=en&start=4&um=1&itbs=1&tbnid=5GjduHjG0U-RWM:&tbnh=117&tbnw=148&prev=/images%3Fq%3Dgsr%2Bthrottle%2Bbody%26um%3D1%26hl%3Den%26sa%3DN%26rlz%3D1T4DMUS_enUS216US217%26tbs%3Disch:1

[DelSolSweetie]

what did the do to your car!

 

 

 

i would help if it was a d-series.. but i wont try cause i have no teggy

[dohc1991integra]

nothings wrong with the car, a gsr just pulls from the opposite side from what i understand. ive found a stock type - r tb im going to buy so im sure that will fix it.