Blackoutt Posted March 3, 2006 Posted March 3, 2006 Has anone used Dave Hickman's products? If you have were they good or bad?
Blackoutt Posted March 3, 2006 Author Posted March 3, 2006 What about exospeed head and block builds?
Humphries Posted March 3, 2006 Posted March 3, 2006 ..SSR..'s are better so he says. he is a Rocket Motorsports Dealer.
Blackoutt Posted March 3, 2006 Author Posted March 3, 2006 See I am still trying to build my B16 a2 and I want the works done to it but everyone wants me to send my core in but I don't want to. So I am trying to figure out the best setup so I can rebuild me engine.I have so far ACL bearing, thermal 3" exhaust,cp pistons,eagle rods, RM M21 camshafts, hondata s300 with a chipped p28, golden eagle cam gears,valve springs and retainers,Full race stage 1 turbo kit, but I have no idea what to do to my block so I do crack it running boost because I am doing a full rebuild on my motor.
..SSR.. Posted March 3, 2006 Posted March 3, 2006 You don't need to send in a core when I build it for you. Let me know when you're ready to start ordering parts.
Blackoutt Posted March 3, 2006 Author Posted March 3, 2006 Hey SSR PM me with the specs of the block and head not part list.
..SSR.. Posted March 4, 2006 Posted March 4, 2006 Email me with your new budget in cash (not what you can get) and what you want (power wise).
Blackoutt Posted March 4, 2006 Author Posted March 4, 2006 8,000 is the budget on the motor and 13,000 with everything (exhaust etc.) and I want around 400-500 hp and I want to at least be able to go up to 20 psi and not tear anything up.
Recommended Posts
Archived
This topic is now archived and is closed to further replies.