whitehatch90 Posted February 12, 2006 Share Posted February 12, 2006 i am about to do a mini-me swap on my 90 civic si. I have complete z6 top have minus the exhaust and intake manifold. i have a v-tec controller and z6 head gasket kit. is this all i need? if not let me know and if you wanna give me any other helpful info e-mail me at morganpowers1@cox.net. Link to comment Share on other sites More sharing options...
xalexjx@yahoo.com Posted February 12, 2006 Share Posted February 12, 2006 you also may need a obd conversion...im not sure...resell or send back the vtec controller..they are quite pointless.,imo...all d-series intakes and exhausts are similar and the orig one will work with a z6 head Link to comment Share on other sites More sharing options...
..SSR.. Posted February 12, 2006 Share Posted February 12, 2006 You'll need the P28 ECU and a rywire.com harness. Fork out $340 (core stock harness). Have fun getting the timing right. Link to comment Share on other sites More sharing options...
whitehatch90 Posted February 13, 2006 Author Share Posted February 13, 2006 is it really required to convert to a different ecu? why wont a v-tec controller work? Link to comment Share on other sites More sharing options...
xalexjx@yahoo.com Posted February 13, 2006 Share Posted February 13, 2006 yes the two engines are diff. obd... Link to comment Share on other sites More sharing options...
..SSR.. Posted February 13, 2006 Share Posted February 13, 2006 Yes it is required. Ditch the controller, they don't do anything good. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.