slowsedan Posted February 10, 2006 Share Posted February 10, 2006 ok i have a 94 civic 4-door right now with just a d16z6 in it. i got a great deal on a wrecked 91 integra and hear is my question. if i wanted to put the integra engine in my civic being as its obd0 would an obd1 integra wiring harness fit on it. i know i will also need mounts linkages hydro tranny obd1 distributor ecu and 4 wire O2 sensor but im not sure of the wiring harness. any help is greaty appreciated thanx Link to comment Share on other sites More sharing options...
CleanGSR Posted February 10, 2006 Share Posted February 10, 2006 No no no. The D16z6 is a great platform to build on. Just build that and turbo and you'll be more than happy for half the money. Look at SolLesHonda's thread. Link to comment Share on other sites More sharing options...
SolLesHonda Posted February 10, 2006 Share Posted February 10, 2006 Under View new posts or under the del sol forum. It is titled "Ok guys, here you go" ... If you have any mroe questions post or PM me. Link to comment Share on other sites More sharing options...
SiR_Richie Posted February 10, 2006 Share Posted February 10, 2006 there right keep the sohc Link to comment Share on other sites More sharing options...
cranny Posted February 10, 2006 Share Posted February 10, 2006 you guys never even asked him what kind of integra it is shame on yous. if its just an Se or base line integra i agree with them kind of. if its a gsr than thats a no brainer go with the B18C1. when i say kind of agree i mean im just a hater of SOHC as far as pumpin money into them i know you can get power but why bother when you can go DOHC. but if i had the finances , i would definitely go B18B1 over ALMOST any SOHC engine. but thats just me. Link to comment Share on other sites More sharing options...
CleanGSR Posted February 10, 2006 Share Posted February 10, 2006 He said it's a 91 integra. No 91 integras came with a B18C1. He also said it's OBD-O. Which tells me it's at best an old B18A1. I know it's not a OBD-O B16 because he can buy the entire car which shows it's USDM not JDM and the B17A1 is OBD-1 so I know it's not that motor. SO 90% chance it's a B18A1. Considering all of that, he'd be better off to build the D16 he's already got. Oh, and shame on you for thinking doubting me. slowsedan- seriously that D16z6 has plenty of potential in it. You could be more than happy with that fully built and turbo'd for a lot less of a headache than swapping a new motor. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.