Randol Stancil Posted January 7, 2017 Share Posted January 7, 2017 Hi Folks. I just bought an ep3 civic that was previously trashed. I got it running but after scanning it, there are 2 codes left. P0108 (Map Sensor) P1259 (Vtec). I was troubleshooting the P0108 (Map Sensor) and tried a new sensor and it didn't work so I started with the helms troubleshooting. When I got to the ecu a11-a19 jumper wire I notice on my ecu connector there are some spliced wires into another connector. Can anyone identify why this is this way? I'm trying to contact PO to get some info but anything would help. https://lh3.googleusercontent.com/LYA0JNcHG8az1S_YMuAu74cLdibbd0GMAONQPtEXW5SX7zdm5bdgUOJiKcS8NaGyWmqrekKPq8VZoXoPJLEcW-0WnmSX9H8hsLiA-ukf22YofZSTKjLU4DOLpP27uhEXGSEP0g=w475-h634-no https://lh3.googleusercontent.com/nbKe9fstYGTxAh-YkxpzA9N8Hun7D6qK-HgGa8EUKHpi4g4gjQK1c2MFdJmVZs_3ThV612b7PjE_GMe7fCLEUvlsXixj1qQuqdyI0M43-f2BSV4LQX8-Pk0R4BQsI0_WKokdvA=w475-h634-no Link to comment Share on other sites More sharing options...
Randol Stancil Posted January 7, 2017 Author Share Posted January 7, 2017 A local friend informed me it's for an Apexi VAFC. I'm guessing the PO ripped it off the car. I rewired the harness to factory color codes and all codes are cleared now. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.