93boostedlude Posted August 21, 2014 Share Posted August 21, 2014 I just got a 1993 prelude turbo set up 850cc injectors aem fuel rail and pressure regulator, I've got a gauge on the rail to watch my pressures and it's running around 40-45 psi which is good, it'll idle all day long I can take off and get into but as soon as I let of the peddle and put clutch in the car drops off and dies a few times it wouldn't start back up and there was no pressure in the rail anymore, I changed the tps and set it I spec 4.5-.5 volts open closed. Any ideas on what else to look for before I start throwing fuel parts at it? Now it won't start or build rail pressure Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.