Anthony Edwards Posted July 29, 2014 Share Posted July 29, 2014 I have a 1994 Del Sol S D15B7. Car died on the way home. Towed it back and it would crank but not start. Checked spark none. Replaced dizzy cause of oil inside still no spark. Checked ECU it was burnt inside replaced now I have spark. Turn on key check engine light comes on for 2 seconds you can hear fuel pump but it still will not start. Sounds like it tries. My guess would be timing maybe is off. i have moved the dizzy back and forth but nothing helps. Can some one verify my dizzy wires . Link to comment Share on other sites More sharing options...
Anthony Edwards Posted July 31, 2014 Author Share Posted July 31, 2014 I got it started today. Just kept turning it over til it started. It gave me a CEL code of 4 (crankshaft position sensor) I did the ohm test and it was 450 ohms so I'm thinking the ECU I bought used might be causing that code. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.