civic89efLS Posted January 28, 2012 Share Posted January 28, 2012 ok, so i recently swapped an h22 into my friends 90' accord, we used f22 tranny till it blew, got a prelude tranny, swapped that in, had to drill holes for f22 tranny mount, and he drove it about 100 miles and it broke down, when I made it to his car to look at it, it was making a grinding noise when put into gear (any gear), when I looked down at the passenger side cv axle, the tranny was spinning around the input shaft, I towed it to my house and popped the axle out, there was a short burst of air when it came out as if it was pressurized. I am wondering the possibilities that could be wrong with it, any help is greatly appreciated. Link to comment Share on other sites More sharing options...
Raley Posted January 29, 2012 Share Posted January 29, 2012 drilled holes in what? the breather (where some put oil in at) is probabaly clogged. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.