5 replies to this topic

[jakethesnake110]

so i just got done puttin a header on my 91 integra ls, after we got it on we realized it was 2 short so i got the exhaust shop to weld a peice of pipe inbetween the exhaust and header where they meet. would this be ok to leave like thise? or will i have to get a flex pipe? and my main concern is now my ABS light is on and idk y? could it just be out of fluid?(havent checked) or a line undone? or wat, plz help me out

[Escape-performance]

ABS light doesn't have anything to do with fluid. Most of the time it means one of the wheels has a bad speed sensor. You can pull the wheels to see if the sensors are still attached but you need a graphing multimeter to test them. The sensors are on the inside of the hub where the axle goes through.

[HeartmylittleLS]

get a flex pipe unless you already have one.

[Turtlehead]

Dude.... Start reading the date on the thread post before posting or others here will start chewing on your a........... Welcome to the site

[DGK ALL DAYY!]

pull all wheels off nd check ur speed sensor wiring for dirt they sometimes get dirty nd can be clean wit electrical cleaner sold at autozone or any parts store, nd if that dont solve it then make sure none of them are broke they are expensive by the way unless u try ur luck at a salvage yard

[lollipoptian]

Plenty of people will help you learn if you ask.

Cheap Herve Leger
Cheap Herve Leger Dresses
Herve Leger Skirts on Sale
cosmetic bottles wholesale