Jump to content

Random Thought Thread v6.9


SpeedDemon

Recommended Posts

  • Replies 328
  • Created
  • Last Reply

so iv been thinkin a little today. iv been honda-less for about a year. ima start saving up for another project. i would like to get either a eg sedan or hb. i dont much care for the coupes. only problem with saving up is christmas is right around the corner, and my job switched to getting paid every two weeks. if things go the way id like them to i can get a 2000 civic dx from a guy my sister works with, but i would have to have about 1k up front and to take over his loan on it. he should only have about 2k left on it. the car as it sits now has si gauge cluster, 15in rota slips with neogen tires, purple blox lugs, purple blox lcas, purple benen tow hook, new rear bumper, takata harnesses, some german exhaust that sounds nice, ctr headlights with hid bulbs, pwjdm fogs, skunk2 shiftknob, ctr shiftboot, back seat delete, ctr steering wheel, 2 aftermarket gagues (idk what they are) and a sunroof lol. also the motor was rebuilt last summer. only problem iv seen with it is it smokes i believe when he shifts, blue or black. blue i know is its burning oil and i believe black is running too rich?? what do you guys think?

Link to comment
Share on other sites

That's what I thought. Like isn't 300bhp the maximum for a front wheel drive car, for it to remain drivable? I've heard this all over the place.

You're gonna be spinning through every gear with 500!

 

yeah its right up there. probably closer to 350. 300 is completely doable but not recommended for all year driving. when i to mine it will be a mild 225-250

so iv been thinkin a little today. iv been honda-less for about a year. ima start saving up for another project. i would like to get either a eg sedan or hb. i dont much care for the coupes. only problem with saving up is christmas is right around the corner, and my job switched to getting paid every two weeks. if things go the way id like them to i can get a 2000 civic dx from a guy my sister works with, but i would have to have about 1k up front and to take over his loan on it. he should only have about 2k left on it. the car as it sits now has si gauge cluster, 15in rota slips with neogen tires, purple blox lugs, purple blox lcas, purple benen tow hook, new rear bumper, takata harnesses, some german exhaust that sounds nice, ctr headlights with hid bulbs, pwjdm fogs, skunk2 shiftknob, ctr shiftboot, back seat delete, ctr steering wheel, 2 aftermarket gagues (idk what they are) and a sunroof lol. also the motor was rebuilt last summer. only problem iv seen with it is it smokes i believe when he shifts, blue or black. blue i know is its burning oil and i believe black is running too rich?? what do you guys think?

 

eh i say pass on that one. find something else lol

Link to comment
Share on other sites

ron, id say snagg it.. 3k for all of that and a nice little Si replica.. GET IT!!

 

just keep what it has in it and try to save and buy a cheap engine b or d and build it up a little maybe then swap them out and try to sell whats in it for cheap and try to make a little money back :)

Link to comment
Share on other sites

My Halloween weekend started on Thursday and ended yesterday. Every day of it was absolutely f**king horrible. Never have I been so disappointed in my life. To top it all, a limb of a tree broke and fell on my roof. I swear I have the worst luck in the world. Anyone feel like stealing my car for me and either crashing it and totaling it or getting rid of it?

Link to comment
Share on other sites

so gopower called me today to let me know my block was in the machine shop getting bored out to 84mm and that the sleeves will be going in tomorrow!!! and they will be taking pictures of the whole build process for me, WOOT!!!! LOVE THIS SHOP!!!

 

oh and the owner used to be a big wig for skunk2 so now he makes all his parts inhouse.. he has a 2010 4 door K24/K20 sedan with all his inhouse parts (cams, pistons, rods, coilovers, etc) that makes 300whp+ all motor that he's selling.. this guy knows his sh!t!!

Link to comment
Share on other sites

so gopower called me today to let me know my block was in the machine shop getting bored out to 84mm and that the sleeves will be going in tomorrow!!! and they will be taking pictures of the whole build process for me, WOOT!excl.gif LOVE THIS SHOP!!!

 

oh and the owner used to be a big wig for skunk2 so now he makes all his parts inhouse.. he has a 2010 4 door K24/K20 sedan with all his inhouse parts (cams, pistons, rods, coilovers, etc) that makes 300whp+ all motor that he's selling.. this guy knows his sh!t!!

 

good luck man. be sure to post pics as you get them

THIS QUESTION

 

IT BOTHERS ME

 

IF WOMEN THINK THEY AREN'T MEANT TO COOK, WHY DO THEY HAVE EGGS AND MILK INSIDE OF THEM?

 

lol. repped.

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.




×
×
  • Create New...

Important Information

Terms of Use | Privacy Policy | Guidelines
We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.