Sign In
Register
Help
so this is going to sound retarded...........i have replaced idk how many clutches, but this time something went wrong....... replaced mine today on my B18B1, got all done and went to take it for the test drive. went to go put it in reverse and it will not go......it just grinds a lil and it feels like it is not dis-engaging......anyone have any insight on the subject feel free to say something.
Page 1 of 1
clutch issues
Rate Topic:
#1
dbtower7234 
- New Member
- Group: Newbie
- Posts: 2
- Joined: 24-July 10
- Vehicles:1994 Hoda Civic CX
Posted 24 July 2010 - 08:57 PM
Back to top
MultiQuote
#2
SpeedDemon
- HF's Residential Demon
-
- Group: Member
- Posts: 6,230
- Joined: 02-April 09
- Gender:Male
- Location:Ohio
- Real Name:David
- Vehicles:1992 Honda Civic Si Hatch
Posted 24 July 2010 - 09:02 PM
incorrect clutch/pp or incorrect installation. did you line up everything right? did you put all the bolts in and tighten them down?
#3
dbtower7234
- New Member
- Group: Newbie
- Posts: 2
- Joined: 24-July 10
- Vehicles:1994 Hoda Civic CX
Posted 24 July 2010 - 09:09 PM
yea everything is tightened down to spec.......alignment tool was used as well.....it was correct parts, made sure of that because i have recieved the wrong one before....i dont know what to do......if there is something to check pease let me know....otherwise im tearing it back down and redoing it tomorrow
#4
rdeaner
- New Member
- Group: Newbie
- Posts: 9
- Joined: 20-August 10
- Vehicles:06 honda civic
Posted 20 August 2010 - 10:25 AM
sounds like its not disengaging like you said. Could be the pressure plate. Is it cable clutch or hydraulic? look at that first. make sure you have everything correct.. Good luck
Page 1 of 1
